English
H2 Gas Monitoring
for research, production, logistics and mobility
MSR-Electronic GmbH - MSR-Italy
The use of hydrogen as an energy source of the future is diverse. In addition to its use in welding or as a fuel for rockets, the focus is currently mainly on the automotive sector. H2 is a very reactive gas, which makes constant monitoring by a gas warning system essential throughout the entire life cycle. The SIL2-certified PolyXeta® sensor with X-Change technology is used for successful gas monitoring. Permanent gas monitoring is used for primary explosion protection and therefore also for plant safety.
Gas hazards with hydrogen
Hydrogen is an excellent energy carrier, but it is also one of the most difficult substances to transport anywhere. The extreme danger of hydrogen leaks lies here in the oxyhydrogen explosion. During research work, on test rigs and during the production of the gas, leakages can occur at any time and cause catastrophic damage in the event of ignition. Warning systems must also be installed in hydrogen production from ammonia and in filling stations to protect people and systems from this highly flammable gas
Product benefits
- SIL2-certified PolyXeta® Sensor PX2 for ATEX zones 1 and 2
- Metrological testing of sensors and devices in accordance with EN 60079-29-1 for flammable gases
- Metrological testing of sensors and devices in accordance with EN 50104 for oxygen
- Cost-reduced calibration through on-site sensor head replacement (X-Change technology)
- Solution for individual requirements, simple installation using mounting bracket
- Simple connection to existing systems (analogue, Modbus)
- 2 potential-free relays, e.g. for activating warning devices
- With MPS(TM) sensor technology with 15+ year service life and maintenance-free
- Electrochemical sensor for H2 measurement in the ppm range
Hydrogen is an excellent energy carrier, but it is also one of the most difficult substances to transport anywhere. The extreme danger of hydrogen leaks lies here in the oxyhydrogen explosion. During research work, on test rigs and during the production of the gas, leakages can occur at any time and cause catastrophic damage in the event of ignition. Warning systems must also be installed in hydrogen production from ammonia and in filling stations to protect people and systems from this highly flammable gas
Product benefits
- SIL2-certified PolyXeta® Sensor PX2 for ATEX zones 1 and 2
- Metrological testing of sensors and devices in accordance with EN 60079-29-1 for flammable gases
- Metrological testing of sensors and devices in accordance with EN 50104 for oxygen
- Cost-reduced calibration through on-site sensor head replacement (X-Change technology)
- Solution for individual requirements, simple installation using mounting bracket
- Simple connection to existing systems (analogue, Modbus)
- 2 potential-free relays, e.g. for activating warning devices
- With MPS(TM) sensor technology with 15+ year service life and maintenance-free
- Electrochemical sensor for H2 measurement in the ppm range
Leggi tutto
Fonte: https://www.msr-electronic.de/wp-content/uploads/2023/11/MSR-Electronic-H2-gas-monitoring-en.pdf
Mercati: Trasporti e Automotive
Parole chiave: Idrogeno
